 |  |  |  |  |  |  |
Instructions for phones attached
to a Panasonic KX-TD System
to a Panasonic KX-TD System
Station Programming
• To enter programming mode
(Be sure the telephone is idle and on-hook.)
Press : | PROGRAM] 99
• To exit programming mode
Press : | PROGRAM] or lift the handset
Flexible Button Assignment
• Account Button
• Enter into programming mode.
• Press the desired Flexible button.
•Dial 6.
• Press STORE button.
• Exit from programming mode
• To enter programming mode
(Be sure the telephone is idle and on-hook.)
Press : | PROGRAM] 99
• To exit programming mode
Press : | PROGRAM] or lift the handset
Flexible Button Assignment
• Account Button
• Enter into programming mode.
• Press the desired Flexible button.
•Dial 6.
• Press STORE button.
• Exit from programming mode
Preferred Line Assignment
Incoming
• Enter into programming mode.
•Dial 2.
• Dial 1, 2, or 3 + CO line number.
• 1 : No Line Preference
• 2 : Ringing Line Preference
• 3 + CO line number
: Prime Line (CO Line) Preference
•Press STORE button.
• Exit from programming mode.
Outgoing
• Enter into programming mode.
•Dial 1.
• Dial 1, 2, 3 + CO line number, or press IN-
TERCOM button.
• 1 : No Line Preference
• 2 : Idle Line Preference
• 3 + CO line number
: Prime Line (CO Line) Preference
• INTERCOM
: Prime Line (INTERCOM) Preference
•Press STORE button.
• Exit from programming mode.
Ringing Tone Selection for CO Buttons
• Enter into programming mode.
• Press the desired CO button.
• Press the same CO button again.
•Dial the tone type number (1 through 8).
• Press STORE button.
• Exit from programming mode.
Self-Extension Number Confirmation
• Enter into programming mode.
• Dial 6.
• Press STORE button.
• Exit from programming mode.
Station Programming Data Default Set
• Enter into programming mode.
•Dial#.
• Press STORE button.
• Exit from programming mode.
Incoming
• Enter into programming mode.
•Dial 2.
• Dial 1, 2, or 3 + CO line number.
• 1 : No Line Preference
• 2 : Ringing Line Preference
• 3 + CO line number
: Prime Line (CO Line) Preference
•Press STORE button.
• Exit from programming mode.
Outgoing
• Enter into programming mode.
•Dial 1.
• Dial 1, 2, 3 + CO line number, or press IN-
TERCOM button.
• 1 : No Line Preference
• 2 : Idle Line Preference
• 3 + CO line number
: Prime Line (CO Line) Preference
• INTERCOM
: Prime Line (INTERCOM) Preference
•Press STORE button.
• Exit from programming mode.
Ringing Tone Selection for CO Buttons
• Enter into programming mode.
• Press the desired CO button.
• Press the same CO button again.
•Dial the tone type number (1 through 8).
• Press STORE button.
• Exit from programming mode.
Self-Extension Number Confirmation
• Enter into programming mode.
• Dial 6.
• Press STORE button.
• Exit from programming mode.
Station Programming Data Default Set
• Enter into programming mode.
•Dial#.
• Press STORE button.
• Exit from programming mode.
• Conference (CONF) Button
• Enter into programming mode.
• Press the desired Flexible button.
•Dial 7.
• Press STORE button.
• Exit from programming mode.
• DSS Button
• Enter into programming mode.
•Press the desired CO or DSS button.
• Dial 1 + extension number.
•Press STORE button.
• Exit from programming mode.
• FWD/DND Button
• Enter into programming mode.
• Press the desired Flexible button.
•Dial 4.
• Press STORE button.
• Exit from programming mode.
• Group-CO (G-CO) Button
• Enter into programming mode.
• Press the desired CO button.
• Dial # + CO line group number (1 through 8).
• Press STORE button.
• Exit from programming mode.
• Loop-CO (L-CO) Button
• Enter into programming mode.
• Press the desired CO button.
• Dial *.
• Press STORE button.
• Exit from programming mode.
• Message Waiting (MESSAGE) Button
• Enter into programming mode.
• Press the desired CO or DSS button.
•Dial 3.
• Press STORE button.
• Exit from programming mode.
• Enter into programming mode.
• Press the desired Flexible button.
•Dial 7.
• Press STORE button.
• Exit from programming mode.
• DSS Button
• Enter into programming mode.
•Press the desired CO or DSS button.
• Dial 1 + extension number.
•Press STORE button.
• Exit from programming mode.
• FWD/DND Button
• Enter into programming mode.
• Press the desired Flexible button.
•Dial 4.
• Press STORE button.
• Exit from programming mode.
• Group-CO (G-CO) Button
• Enter into programming mode.
• Press the desired CO button.
• Dial # + CO line group number (1 through 8).
• Press STORE button.
• Exit from programming mode.
• Loop-CO (L-CO) Button
• Enter into programming mode.
• Press the desired CO button.
• Dial *.
• Press STORE button.
• Exit from programming mode.
• Message Waiting (MESSAGE) Button
• Enter into programming mode.
• Press the desired CO or DSS button.
•Dial 3.
• Press STORE button.
• Exit from programming mode.
• One-Touch Dialing Button
• Enter into programming mode.
• Press the desired Flexible button.
• Dial 2 + desired number.
•Press STORE button.
• Exit from programming mode.
` SAVE Button
• Enter into programming mode.
• Press the desired Flexible button.
•Dial 5.
• Press STORE button.
• Exit from programming mode.
Single-CO (S-CO) Button
•Enter into programming mode.
• Press the desired CO button.
•Dial O.
• Dial CO line number (01 through 08) or
(01 through 24).
- 01 through 08: if connected to the KX-TD816
- 01 through 24: if connected to the KX-TD1232
•Press STORE button.
• Exit from programming mode.
• Enter into programming mode.
• Press the desired Flexible button.
• Dial 2 + desired number.
•Press STORE button.
• Exit from programming mode.
` SAVE Button
• Enter into programming mode.
• Press the desired Flexible button.
•Dial 5.
• Press STORE button.
• Exit from programming mode.
Single-CO (S-CO) Button
•Enter into programming mode.
• Press the desired CO button.
•Dial O.
• Dial CO line number (01 through 08) or
(01 through 24).
- 01 through 08: if connected to the KX-TD816
- 01 through 24: if connected to the KX-TD1232
•Press STORE button.
• Exit from programming mode.
Call Forwarding
Setting
•All Calls
•Off-hook.
• Press FWD/DND button.
• Dial 2 + extension number.
• On-hook.
•Busy
•Off-hook.
• Press FWD/DND button.
• Dial 3 + extension number.
• On-hook.
• No Answer
•Off-hook.
• Press FWD/DND button.
• Dial 4 + extension number.
• On-hook.
• Busy / No Answer
• Off-hook.
• Press FWD/DND button.
• Dial 5 + extension number.
• On-hook.
• to CO Line
•Off-hook.
• Press FWD/DND button.
•Dial 6 + line access code (9 or 81 through
88)
+ phone number + #.
• On-hook.
• Follow Me
• at the destination extension;
•Off-hook.
• Press FWD/DND button.
• Dial 7 + your extension number.
• On-hook.
Cancelling
• At the original extension
• Off-hook.
• Press FWD/DND button.
• Dial 0.
• On-hook.
—At the destination extension — "Follow
Me (All Calls)" only
•Off-hook.
• Press FWD/DND button.
• Dial 8 + your extension number.
• On-hook.
Setting
•All Calls
•Off-hook.
• Press FWD/DND button.
• Dial 2 + extension number.
• On-hook.
•Busy
•Off-hook.
• Press FWD/DND button.
• Dial 3 + extension number.
• On-hook.
• No Answer
•Off-hook.
• Press FWD/DND button.
• Dial 4 + extension number.
• On-hook.
• Busy / No Answer
• Off-hook.
• Press FWD/DND button.
• Dial 5 + extension number.
• On-hook.
• to CO Line
•Off-hook.
• Press FWD/DND button.
•Dial 6 + line access code (9 or 81 through
88)
+ phone number + #.
• On-hook.
• Follow Me
• at the destination extension;
•Off-hook.
• Press FWD/DND button.
• Dial 7 + your extension number.
• On-hook.
Cancelling
• At the original extension
• Off-hook.
• Press FWD/DND button.
• Dial 0.
• On-hook.
—At the destination extension — "Follow
Me (All Calls)" only
•Off-hook.
• Press FWD/DND button.
• Dial 8 + your extension number.
• On-hook.
Voice Mail (VM) Transfer Button
• Enter into programming mode.
• Press the desired Flexible button.
• Dial 8 + extension number of the Voice Mail.
• Press STORE button.
• Exit from programming mode.
Handset / Headset Selection
• Enter into programming mode.
•Dial 9.
•Dial 1 or 2.
• 1: Handset mode
• 2: Headset mode
• Press STORE button.
• Exit from programming mode.
• Enter into programming mode.
• Press the desired Flexible button.
• Dial 8 + extension number of the Voice Mail.
• Press STORE button.
• Exit from programming mode.
Handset / Headset Selection
• Enter into programming mode.
•Dial 9.
•Dial 1 or 2.
• 1: Handset mode
• 2: Headset mode
• Press STORE button.
• Exit from programming mode.
